The Drivers module is shown in Figure 1.
Figure 1 - Drivers Module
The page with the module consists of:
Clicking on the columns Full name and Unit name (table in Figure 1) opens a card with information about the driver/unit. At the same time, in the column Unit name the vehicle in which the driver is identified is displayed. The options in Action column depend on whether the driver has been identified in the car or not.
You can download the table with drivers' information on your computer clicking the Save button()in the top right corner of the table.
Available actions for the drivers with the current identification in the vehicle (Figure 2):
Figure 2 - Actions for the drivers with the current identification on the vehicle.
Available actions for the drivers without the current identification in the vehicle (Figure 3):
Figure 3 - Actions for the drivers without the current identification in the vehicle.
Open Map action takes you to a page with a map, which will indicate the current location of the vehicle.
Build Report action takes you to the reports page where this driver will be selected.
The card with information about the driver, the transition to which is carried out by clicking on the driver’s name in the Name column, is presented in Figure 4.
Figure 4 - The card with information about the driver
The card contains the following elements:
Article Number: 3323
Author: Tue, Jan 14, 2020
Last Updated: Tue, Jan 14, 2020
Author: Анисимов Максим Михайлович [firstname.lastname@example.org]
Online URL: https://kb.scout-gps.ru/article/scout-online-drivers-3323.html